No luck
.
I ran it and overheated it with the original fuse in that switch. Then I popped out the fuse and stuck a wire in from one pin to the other. Still didn't turn on...
I'm wondering if thats the breaker we're looking for. Without the fuse (and no wire), everything gets power with the key on but it won't start. As soon as I bridge the connection, it will start right up.
I was poking around a bit under the front where all the connections are and noticed this:
Any ideas what that is? I'm not sure if theres a cover on it that comes off.
At first glance, it slightly reminded me of a plug to pull codes.
