I have a yukon cxl150 by e-ton, does anybody know where i can get some imformation about the kickstart, it dosen't work, or the electric starter. i jus want to try to get it running to see if its worth putting any money in it. can i check the elect. starter,outside of the atv. i tried to hook up a jumper and its spins out of the atv, but not in it.
I have a yukon cxl150 by e-ton, does anybody know where i can get some imformation about the kickstart, it dosen't work, or the electric starter. i jus want to try to get it running to see if its worth putting any money in it. can i check the elect. starter,outside of the atv. i tried to hook up a jumper and its spins out of the atv, but not in it.
Got it running, but now i see line comming from the carb, that aren't hooked to anything, probully vents and drains. but i don;t knw if i have the right ones hooked up. san anybody send me a scetch of the carb, and where the fuel lines and drains, and vents are.
Hello,
It sounds like the solenoid may not be working. If your starter turns it may not be engaging with the flywheel. The starteris most likely good though it may not be getting a sufficient amount of amperage to turn the motor over. The best way of checking this is by feeling if it's getting hot under load. Kepp the starter on if it's not making any noise and see if it gets hot. This will indicate if the amperage is insufficient. This may indicate a poor connection or bad cable. Also check your battery cables at the battery and at the starter.
As far as the kick starter they usually have some sort of cam. Chances are that the cam is worn or broken. They are generally not hard to fix or replace. Just make sure that if you do it yourself that you take pictures if you are a novice to make sure that you do it correctly. Also, be cautious if the assembly has a return spring so that you do not get embedded by it.
Good luck
Help, yukon CXL150
