1992 350L 4X4 Float Settings

[schwarry01]

I have a 92 350L 2-stroke. I'm trying to find out what the float setting should be on the carb. Also, I'm getting about 110 pounds of compression. Is this ok?

[Trikemaster]

Welcome to the Best ATV forum

[Trikemaster]

Originally Posted by schwarry01

I have a 92 350L 2-stroke. I'm trying to find out what the float setting should be on the carb. Also, I'm getting about 110 pounds of compression. Is this ok?

If your talking about #22 You just screw it in....Float setting???
CARBURETOR ASSEMBLY 350 4X4 / W928139 - 1992 Polaris TRAIL BOSS 350L 4X4 - W928139

1992 Polaris TRAIL BOSS 350L 4X4 - W928139 OEM Parts, 1992 Polaris TRAIL BOSS 350L 4X4 - W928139 OEM ATV Parts - BikeBandit.com

[Trikemaster]

Compression needs to be min 100psi best if 120psi for the 350L. Did you test the compression when the engine was hot?

[schwarry01]

The compression was tested when cold.

[Trikemaster]

Compression tests are done on a hot engine. This way all the parts expand with heat and get better compression....
Also, run the test with an open throttle.....

-You can do a wet test which is where you add a table spoon or so of oil to the cylinder and check the compression.. this tells you how well the rings are sealing. If the compression jumps way up, then you have worn rings

Your compression is better than expected....