ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
I purchased a 1996 King Quad and the left front tire has a pretty severe lean and the steering was a little weird. I tried to flip flop the tie rods to see if it would help the steering but, it didn't. The camber is just too far out of whack on the left side. I don't know if all year A-arms and knuckles are identical but, it lloks as though the previous owner had replaced the left knuckle and maybe its casting is a little different.
Anyway, I want to get the whole left side from a 1995 does anyone know if the whole upper/lower A-arm are the same+knuckle.
I need a picture or desciption on how the tie rods attach the the steering shaft...don't know if the previous owner messed with them.
 
1 - 1 of 1 Posts
Top