ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter #1
My battery was failing but I was still able to start atv with pull start. I replaced my battery and the atv started right up. I turned the atv off to clean it. when I tried to restart, the starter cranked with no response from the engine. I checked for spark and there was none. I replaced spark plug and checked for spark. There was initially spark with new plug. I reinstalled new plug and atv fired up but only for about 30 seconds. I rechecked for spark and there was no spark again. I traced wires back to CDI and quit troubleshooting due to lack of knowledge. Any ideas and help greatly appreciated.


Sincerely,

Mark
 
1 - 3 of 3 Posts
Top