Joined
·
61 Posts
Hey guys I need some parts. I need a Jug/cylinder and some piston rings. If you guys have any of these parts or know where to get them, tell me.
Thanks,
Dave
Thanks,
Dave
2001 Polaris Sportsman 90
Join the discussion
Recommended Reading
-
Polaris prowler250
Polaris ATVsCan somebody help me I have a Polaris prowler 250 however it’s based on the trailblazer or trail boss I have rang Polaris dealers ad they said I would need the vin number which I can’t find yet Bought 2 years ago The problem I’m having is my wheel snapped on the rear axle Or can anyone tell me...- 0
- 20
-
Peter John · updated
-
99 sportsman 500 Mikuni MKBST-34-190 Carb issue
Polaris ATVsOk folks need some trouble shooting help. The carb was leaking gas, so I bought a kit and rebuilt it. I didn't have any instructions other than the diagram to go by. Kept the original main jet and pilot jet. Replaced the needle and seat and replaced the fuel screw. The carb bowl is getting gas...- 2
- 32
-
2007 Polaris Sportsmans 500HO dash issue (RPM) not working
Polaris ATVsAnybody run into this problem with the dash rpm not registering or showing the engine rpm's ?- 0
- 32
-
bruteforce650 · updated
-
Battery Tender Hooked up in Reverse
Polaris ATVsHello All, I own a 2006 Polaris Scrambler. I mistakenly connected my battery tender overnight with the cables reversed - positive to negative and vice versa. Other than the battery, could I have damaged any electrical components. I did notice that I have had an issue where the machine dies...- 2
- 115
-
birdtrout · updated
-
Scrambler 500 alignment?
Polaris ATVsI just bought an 07 scrambler 500. When I let off or push on the throttle the back end seems to slide slightly to the right. Its not bad, I just have never had a machine do this to me. Has anyone had this problem, or maybe know what it is. Any help would be much appreciated. I'm new to having a...- 0
- 67
-
Tgunn10 · updated
Join now to ask and comment!