ATV Forum banner
1 - 1 of 1 Posts

8 Posts
Discussion Starter · #1 ·
I have a 2002 Yamaha Kodiak and my 4 X 4 push button keeps blowing its 3 amp fuse. I can put a ten in and it will last a while. The wiring is ok and the actuator motor is ok. Tested both.
The only other thing can be the front diff. Anyideas what could cause this? It isnt making any unneccessary noise or anything. I know that the rod that runs the front diff was replaced at one time . Maybe front diff not together right ??
Any ideas?
Hate to tear apart for nothing.
1 - 1 of 1 Posts