ATV Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
OK... stupid question. I'd like to upgrade the handle bars on my '07 Honda 450ER from 7/8" to 1 1/8" bars. What do you do with the ignition and indicating lights? I've seen the bar clamps from Trail Tech that incorporate these items. Is that my only option, it seems this option would leave the wiring to the ignition and pilot lights overly exposed. Any suggestions would be appreciated.
 

·
Premium Member
Joined
·
389 Posts
I have a 400ex and I upgraded the bars and made a mount under the hood and located the lights there. the key is mounted buy the motor with a couple of zip ties it works and you cannot see it. Ive seen the trail tech peice and it is a nice piece and everything looked mounted good I just did not want that ugly thing on my quad.
 

·
Registered
Joined
·
5 Posts
i have a new gen 400ex and i put mine right on the hood followin the lines if you know wat i mean ... i think it looks pre good . the 450 have a nice flat spot at the top of the hood which would work perf if your into it.:thumbsup:
 
1 - 3 of 3 Posts
Top