ATV Forum banner

1 - 1 of 1 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hey guys, I got this trx300 that originally had no spark, figured out that the ignition pulse generator was the issue. So removed the left hand cover and replaced it. When I pulled the cover off, the shifter came with it. I thought I got it back to where it was supposed to be but it wouldn’t upshift. From reading other threads, figured I had to pull the right hand cover off to line the shifter up. So with it off, I lined all the timing marks up, so pretty sure that part is right. So decided to just put it back together and test it out, I was able to upshift pretty normally but could barely get it to downshift. I can push the shifter down but just springs back, like it’s not doing anything. Any thoughts on this? It did shift before the starting issue
 
1 - 1 of 1 Posts
Top