ATV Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi! I am a self taught atv,motorcycle mechanic for a small shop. I have a rincon in and durring tear down. I turned the motor to TDC and checked the can for timing marks. It looked odd,one cam lobe almost straight down and the other was to the side. I am assuming that it was out of time...
When rebuilding I set the cam lobes down and out. The cam marks seemed to align with the cam holder.
The bike starts easy but acts like it's hitting a rev limiter early. Problem could be unrelated to timing. I just want a second opinion before I start trouble shooting.

Thanks in advance :)
 
1 - 1 of 1 Posts
Top