[Dustman]

I am new to this forum and have a question. I just bought a 2007 Can Am Outlander 800 and I have a Dodge short bed pickup. Is there anything I can do to get the quad to fit in the back of the pickup and close the tailgate? I was thinking I could build a ramp in the front of the bed to lift the bumper of the quad over the bed rail but I don't want to be to close to the rear window of the pickup. Can you help me with something that has worked for you if you have had this same problem? Thanks for your help and sorry if this question has come up before, I didn't find anything in a search.

 

[saber6]

I built a platform in front of my wheel wells that the front tires sat on. That got the front end of the grizzly high enough to close the tail gate on an 87 Toyota.

 

[tomgodd]

I bought a trailer. but i drive a S10 and our utility is to big to fit in it.

 

[Dustman]

I have a trailer for the ATV, but my problem is when I am going camping I have a bumper pull camp trailer so the ATV needs to fit in the bed with the tailgate closed so I can pull the camp trailer. I am going to see if building a platform in front of the wheel wells will work. Thanks for your help. Any other ideas are welcome.