on the 660 griz
Join the discussion
Recommended Reading
-
Rolling in gear
Yamaha ATVsHi all. My son and I have p/u a old 2001 Yamaha Bear tracker 250 not running. But I noticed that when you put it in gear it rolls freely in all gears and neutral. Is the normal? Thank you for the help look forward to asking lots of good stuff. Thank you David- 0
- 7
-
upper and lower control arms 01 kodiak 400
Yamaha ATVsdoes anyone know if the 01 kodiak 400 4x4 upper and lower control arms cross to another yamaha model. Parts for this atv are hard to find and very pricey- 4
- 94
-
93truck · updated
-
Major clunking PLEASE HELP, it's not consistant, idles perfectly but soon as you try to drive it, major friction and clunking noise
Yamaha ATVsOk we have a new major issue that has come up now, I took it for a rip and after going through a mud puddle, there is a horrible clunk noise and I couldn't move forward anymore without major metal on metal clunking, I tried to reverse and that worked for a bit with no sound, then it started...- 2
- 50
-
damnlukeman · updated
-
High idle, and sputtery when driving full throttle
Yamaha ATVsI got a 2004 big bear, and recently put Honda bond on me carb bowl so it won't leak, and changed the oil. I started the bike without the wires plugged into the carb because I forgot they existed. But anyway it has a high idle now even after I've plugged the wires back up. The bowl also leaks out...- 4
- 82
-
Bradkirk401 · updated
-
2008 Yamaha Grizzly 700 not running
Yamaha ATVsI just bought this a few days ago and I got it on the trails today and within 20 min, the engine light came on, so I pulled over and turned it off, it then wouldn't start and read code 46, we tightened all connections and looked for issues in the wires, then we boosted it and it ran for 5...- 6
- 83
-
damnlukeman · updated
Join now to ask and comment!